Victorian Style Bathroom Lighting | One of the main reasons people choose LED rope lighting over other designs of lighting is because it is so versatile. Not only can or not it’s shaped to adjust to any area, it could be cut to adjust to and spliced to pieces if the longer piece is needed.
It may also be sliced if you need a color combination to match your d?ýcor. It is important to specifically your work before you begin cutting the rope or attempt to splice it. The following is helpful tips for cutting and splicing LED rope lighting:
• Cutting the Rope Lights – In order to reduce these lights you might want one of many following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to contain the pipe cutter when you get a straighter edge and there is less chance of cutting crooked. The entire pipe has slash marks about the pipe tell you where it could be cut. Do not cut anywhere which is not marked or else you will find yourself ruining that bit of light making this useless. These slash marks run from either eighteen inches or thirty-six inches.
See also: Led Flower Branch Lights
The two wire type is every eighteen inches and the three wire, or chaser lights, is every thirty-six inches. You should measure the area you wish to cover carefully and select the rope type as outlined by the length of time the rope has to be. If thirty-six inches is way too long you will need to get the two-wire light. Make the cut cleanly then trim off of the excess copper wire from your end by bending the light to show it. Once it’s properly prepared, you should add the connector kit or splice another color or length to the light.