Ultra Bright Led Christmas Lights

Ultra Bright Led Christmas Lights | One of the main reasons people choose LED rope lighting over other designs of lighting is which is so versatile. Not only can it be shaped to match any area, it is usually cut to match and spliced along with other pieces in case a longer piece should be used.

It may also be sliced if you prefer a color combination to match your d?Ă½cor. It is important to know exactly what you are doing before you begin cutting the rope or attempt to splice it. The following is tips for cutting and splicing LED rope lighting:

• Cutting the Rope Lights – In order to chop these lights you’ll want one of the following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to contain the pipe cutter when you have a straighter edge and there is less chance of cutting crooked. The entire pipe has slash marks around the pipe to inform you where it is usually cut. Do not cut anywhere that isn’t marked or else you will end up ruining that piece of light making it useless. These slash marks run from either eighteen inches or thirty-six inches.

See also: Lighting For Girls Bedrooms

The two wire type is every eighteen inches and the three wire, or chaser lights, is every thirty-six inches. You should look at the area you need to cover carefully and choose the rope type in accordance with how long the rope has to be. If thirty-six inches is simply too long you will need to get the two-wire light. Make the cut cleanly then trim off the excess copper wire in the end by bending the light to expose it. Once it’s properly prepared, you have to add the connector kit or splice another color or length to the light.