Tiki Hut Lighting Ideas

Tiki Hut Lighting Ideas | One of the main reasons people choose LED rope lighting over other forms of lighting is because it is so versatile. Not only can it be shaped to adjust to any area, it may be cut to adjust to and spliced with other pieces if your longer piece is needed.

It can also be sliced should you prefer a color combination to match your d?Ă½cor. It is important to understand specifically your work before you start cutting the rope or attempt to splice it. The following is helpful information for cutting and splicing LED rope lighting:

• Cutting the Rope Lights – In order to reduce these lights you’ll want one of several following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to possess the pipe cutter because you get yourself a straighter edge and there is less probability of cutting crooked. The entire pipe has slash marks about the pipe to show you where it may be cut. Do not cut anywhere that’s not marked or else you will find yourself ruining that part of light rendering it useless. These slash marks run from either eighteen inches or thirty-six inches.

See also: Encore Landscape Lighting

The two wire type is every eighteen inches and the three wire, or chaser lights, is every thirty-six inches. You should measure the area you need to cover carefully and judge the rope type as outlined by the length of time the rope has to be. If thirty-six inches is simply too long you will need to have the two-wire light. Make the cut cleanly and then trim from the excess copper wire in the end by bending the light to reveal it. Once it can be properly prepared, you’ll want to add the connector kit or splice another color or length to the light.

Tags: