Solar Landscape Lighting Ideas | One of the main reasons people choose LED rope lighting over other kinds of lighting is since it is so versatile. Not only can it’s shaped to fit any area, it is usually cut to fit and spliced with other pieces if a longer piece is needed.
It can be sliced if you want a color combination to match your d?ýcor. It is important to know precisely your work before you begin cutting the rope or attempt to splice it. The following is helpful tips for cutting and splicing LED rope lighting:
• Cutting the Rope Lights – In order to reduce these lights you must have one of many following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to have the pipe cutter as you have a straighter edge then there is less chance of cutting crooked. The entire pipe has slash marks around the pipe tell you where it is usually cut. Do not cut anywhere that’s not marked or else you end up ruining that part of light rendering it useless. These slash marks run from either eighteen inches or thirty-six inches.
See also: Wall Lights For Bedrooms
The two wire type is every eighteen inches as well as the three wire, or chaser lights, is every thirty-six inches. You should appraise the area you would like to cover carefully and select the rope type in accordance with just how long the rope should be. If thirty-six inches is just too long you’ll need to obtain the two-wire light. Make the cut cleanly and after that trim over excess copper wire from the end by bending the light to show it. Once it really is properly prepared, you should add the connector kit or splice another color or length to the light.