Small Church Lighting Design | One of the main reasons people choose LED rope lighting over other forms of lighting is since it is so versatile. Not only can it be shaped to suit any area, it may be cut to suit and spliced to pieces in case a longer piece is needed.
It can also be sliced should you prefer a color combination to match your d?ýcor. It is important to know exactly what you are doing before you start cutting the rope or make an effort to splice it. The following is tips for cutting and splicing LED rope lighting:
• Cutting the Rope Lights – In order to slice these lights you’ll want one of several following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to contain the pipe cutter since you get a straighter edge as there are less potential for cutting crooked. The entire pipe has slash marks on the pipe to show you where it may be cut. Do not cut anywhere which is not marked or you will turn out ruining that bit of light so that it is useless. These slash marks run from either eighteen inches or thirty-six inches.
See also: Landscape Lighting Timer Instructions
The two wire type is every eighteen inches and also the three wire, or chaser lights, is every thirty-six inches. You should appraise the area you want to cover carefully and judge the rope type as outlined by the length of time the rope must be. If thirty-six inches is simply too long you’ll need to find the two-wire light. Make the cut cleanly after which trim over excess copper wire from your end by bending the sunshine to expose it. Once it really is properly prepared, you have to add the connector kit or splice another color or length to the sunshine.