Semi Flush Mount Lighting Lowes | One of the main reasons people choose LED rope lighting over other kinds of lighting is since it is so versatile. Not only can it be shaped to fit any area, it can be cut to fit and spliced to pieces in case a longer piece is necessary.
It can be sliced if you prefer a color combination to match your d?ýcor. It is important to know precisely what you are doing before starting cutting the rope or make an effort to splice it. The following is a guide for cutting and splicing LED rope lighting:
• Cutting the Rope Lights – In order to chop these lights you need to have one of many following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to possess the pipe cutter as you have a straighter edge and there’s less possibility of cutting crooked. The entire pipe has slash marks for the pipe to show you where it can be cut. Do not cut anywhere which is not marked or you will turn out ruining that piece of light making this useless. These slash marks run from either eighteen inches or thirty-six inches.
See also: Led Daylight Desk Lamp
The two wire type is every eighteen inches and the three wire, or chaser lights, is every thirty-six inches. You should appraise the area you wish to cover carefully and choose the rope type in accordance with how much time the rope needs to be. If thirty-six inches is simply too long you’ll need to obtain the two-wire light. Make the cut cleanly and after that trim off the excess copper wire from your end by bending the lighting to expose it. Once it can be properly prepared, you need to add the connector kit or splice another color or length to the lighting.