Seattle Landscape Lighting

Seattle Landscape Lighting | One of the main reasons people choose LED rope lighting over other kinds of lighting is because it’s so versatile. Not only can you choose shaped to suit any area, it can be cut to suit and spliced to pieces if the longer piece should be used.

It may also be sliced if you prefer a color combination to match your d?Ă½cor. It is important to know exactly your work prior to starting cutting the rope or try to splice it. The following is helpful tips for cutting and splicing LED rope lighting:

• Cutting the Rope Lights – In order to cut these lights you need to have one of the following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to possess the pipe cutter when you obtain a straighter edge and there is less possibility of cutting crooked. The entire pipe has slash marks about the pipe to show you where it can be cut. Do not cut anywhere that is not marked or else you wind up ruining that piece of light making this useless. These slash marks run from either eighteen inches or thirty-six inches.

See also: Ylighting Wall Sconce

The two wire type is every eighteen inches as well as the three wire, or chaser lights, is every thirty-six inches. You should appraise the area you need to cover carefully and judge the rope type in accordance with the length of time the rope must be. If thirty-six inches is simply too long you will want to have the two-wire light. Make the cut cleanly and after that trim off of the excess copper wire in the end by bending the sunshine to reveal it. Once it can be properly prepared, you should add the connector kit or splice another color or length to the sunshine.