Rustic Country Lighting Chandeliers | One of the main reasons people choose LED rope lighting over other styles of lighting is which is so versatile. Not only can it be shaped to match any area, it could be cut to match and spliced with pieces in case a longer piece is needed.
It may also be sliced if you want a color combination to match your d?ýcor. It is important to specifically what you are doing before you start cutting the rope or try to splice it. The following is helpful tips for cutting and splicing LED rope lighting:
• Cutting the Rope Lights – In order to reduce these lights you must have one of several following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to hold the pipe cutter because you get yourself a straighter edge as there are less probability of cutting crooked. The entire pipe has slash marks on the pipe tell you where it could be cut. Do not cut anywhere that is not marked or else you will find yourself ruining that little bit of light rendering it useless. These slash marks run from either eighteen inches or thirty-six inches.
See also: Top Rated Under Cabinet Lighting
The two wire type is every eighteen inches and the three wire, or chaser lights, is every thirty-six inches. You should measure the area you wish to cover carefully and judge the rope type as outlined by the length of time the rope needs to be. If thirty-six inches is simply too long you will need to find the two-wire light. Make the cut cleanly then trim off of the excess copper wire in the end by bending the lighting to expose it. Once it is properly prepared, you need to add the connector kit or splice another color or length to the lighting.