Recessed Lighting In Master Bedroom

Recessed Lighting In Master Bedroom | One of the main reasons people choose LED rope lighting over other styles of lighting is which is so versatile. Not only can it’s shaped to adjust to any area, it can be cut to adjust to and spliced to pieces if your longer piece should be used.

It can be sliced if you need a color combination to match your d?Ă½cor. It is important to know exactly your work prior to starting cutting the rope or attempt to splice it. The following is helpful tips for cutting and splicing LED rope lighting:

• Cutting the Rope Lights – In order to cut these lights you need to have one of many following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to contain the pipe cutter because you have a straighter edge and there is less possibility of cutting crooked. The entire pipe has slash marks on the pipe to show you where it can be cut. Do not cut anywhere that is not marked or you will turn out ruining that part of light so that it is useless. These slash marks run from either eighteen inches or thirty-six inches.

See also: Track Lighting Plug In

The two wire type is every eighteen inches and also the three wire, or chaser lights, is every thirty-six inches. You should appraise the area you would like to cover carefully and select the rope type based on the length of time the rope has to be. If thirty-six inches is just too long you’ll need to find the two-wire light. Make the cut cleanly after which trim over excess copper wire through the end by bending the sunlight to show it. Once it really is properly prepared, you’ll want to add the connector kit or splice another color or length to the sunlight.