Recessed Lighting For Bedroom | One of the main reasons people choose LED rope lighting over other designs of lighting is because it is so versatile. Not only can you choose shaped to suit any area, it is usually cut to suit and spliced with other pieces in case a longer piece is required.
It can even be sliced if you prefer a color combination to match your d?ýcor. It is important to understand specifically your work prior to starting cutting the rope or make an effort to splice it. The following is helpful information for cutting and splicing LED rope lighting:
• Cutting the Rope Lights – In order to reduce these lights you might want one of many following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to possess the pipe cutter when you get a straighter edge as there are less potential for cutting crooked. The entire pipe has slash marks on the pipe to show you where it is usually cut. Do not cut anywhere that isn’t marked or else you will wind up ruining that bit of light making it useless. These slash marks run from either eighteen inches or thirty-six inches.
See also: Powder Room Lighting Fixtures
The two wire type is every eighteen inches and also the three wire, or chaser lights, is every thirty-six inches. You should measure the area you need to cover carefully and choose the rope type in accordance with how long the rope must be. If thirty-six inches is simply too long you will want to find the two-wire light. Make the cut cleanly then trim off the excess copper wire through the end by bending the sunshine to reveal it. Once it is properly prepared, you’ll want to add the connector kit or splice another color or length to the sunshine.