Nightclub Lighting Ideas

Nightclub Lighting Ideas | One of the main reasons people choose LED rope lighting over other kinds of lighting is since it is so versatile. Not only can it’s shaped to adjust to any area, it is usually cut to adjust to and spliced to pieces in case a longer piece is necessary.

It can even be sliced if you prefer a color combination to match your d?Ă½cor. It is important to specifically your work before you begin cutting the rope or make an effort to splice it. The following is helpful information for cutting and splicing LED rope lighting:

• Cutting the Rope Lights – In order to reduce these lights you might want one of many following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to possess the pipe cutter when you get a straighter edge then there is less chance of cutting crooked. The entire pipe has slash marks on the pipe tell you where it is usually cut. Do not cut anywhere that’s not marked or else you will end up ruining that little bit of light rendering it useless. These slash marks run from either eighteen inches or thirty-six inches.

See also: Led Christmas Rope Lighting

The two wire type is every eighteen inches along with the three wire, or chaser lights, is every thirty-six inches. You should look at the area you need to cover carefully and choose the rope type in accordance with just how long the rope should be. If thirty-six inches is simply too long then you need to obtain the two-wire light. Make the cut cleanly and after that trim over excess copper wire from the end by bending the light to reveal it. Once it really is properly prepared, you’ll want to add the connector kit or splice another color or length to the light.