Modern Bedroom Lighting | One of the main reasons people choose LED rope lighting over other styles of lighting is since it is so versatile. Not only can it be shaped to adjust to any area, it can be cut to adjust to and spliced along with other pieces in case a longer piece should be used.
It can even be sliced if you want a color combination to match your d?ýcor. It is important to know precisely what you’re doing prior to starting cutting the rope or attempt to splice it. The following is tips for cutting and splicing LED rope lighting:
• Cutting the Rope Lights – In order to cut these lights you must have one of the following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to have the pipe cutter since you get a straighter edge as there are less possibility of cutting crooked. The entire pipe has slash marks around the pipe to inform you where it can be cut. Do not cut anywhere that’s not marked or you’ll wind up ruining that bit of light so that it is useless. These slash marks run from either eighteen inches or thirty-six inches.
See also: Joss & Main Lighting
The two wire type is every eighteen inches as well as the three wire, or chaser lights, is every thirty-six inches. You should measure the area you need to cover carefully and select the rope type as outlined by just how long the rope needs to be. If thirty-six inches is just too long then you need to get the two-wire light. Make the cut cleanly and after that trim off of the excess copper wire from the end by bending the lighting to show it. Once it can be properly prepared, you should add the connector kit or splice another color or length to the lighting.