Mariana Home Lighting | One of the main reasons people choose LED rope lighting over other forms of lighting is which is so versatile. Not only can it be shaped to match any area, it can be cut to match and spliced with other pieces if the longer piece is required.
It can even be sliced if you need a color combination to match your d?ýcor. It is important to understand specifically what you’re doing prior to starting cutting the rope or try and splice it. The following is tips for cutting and splicing LED rope lighting:
• Cutting the Rope Lights – In order to reduce these lights you need to have one of several following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to hold the pipe cutter because you get a straighter edge and there’s less chance of cutting crooked. The entire pipe has slash marks about the pipe to inform you where it can be cut. Do not cut anywhere that is not marked or you’ll turn out ruining that little bit of light making it useless. These slash marks run from either eighteen inches or thirty-six inches.
See also: Led Soffit Strip Lighting
The two wire type is every eighteen inches along with the three wire, or chaser lights, is every thirty-six inches. You should look at the area you need to cover carefully and select the rope type based on the length of time the rope needs to be. If thirty-six inches is simply too long you will need to have the two-wire light. Make the cut cleanly and after that trim off of the excess copper wire through the end by bending the sunshine to reveal it. Once it can be properly prepared, you need to add the connector kit or splice another color or length to the sunshine.