Makeup Vanity Lighting Ideas

Makeup Vanity Lighting Ideas | One of the main reasons people choose LED rope lighting over other kinds of lighting is since it is so versatile. Not only can it’s shaped to fit any area, it is usually cut to fit and spliced with other pieces if your longer piece should be used.

It may also be sliced if you want a color combination to match your d?Ă½cor. It is important to specifically what you are doing before you start cutting the rope or attempt to splice it. The following is a guide for cutting and splicing LED rope lighting:

• Cutting the Rope Lights – In order to cut these lights you’ll want one of the following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to hold the pipe cutter when you get yourself a straighter edge as there are less probability of cutting crooked. The entire pipe has slash marks about the pipe tell you where it is usually cut. Do not cut anywhere which is not marked or else you turn out ruining that part of light making it useless. These slash marks run from either eighteen inches or thirty-six inches.

See also: Pipe Lighting Diy

The two wire type is every eighteen inches and also the three wire, or chaser lights, is every thirty-six inches. You should appraise the area you would like to cover carefully and judge the rope type in accordance with the length of time the rope should be. If thirty-six inches is too long you will want to get the two-wire light. Make the cut cleanly and then trim from the excess copper wire in the end by bending the light to reveal it. Once it’s properly prepared, you have to add the connector kit or splice another color or length to the light.