Lowes Lighting Flush Mount

Lowes Lighting Flush Mount | One of the main reasons people choose LED rope lighting over other styles of lighting is which is so versatile. Not only can or not it’s shaped to fit any area, it is usually cut to fit and spliced to pieces if a longer piece is required.

It can be sliced if you prefer a color combination to match your d?Ă½cor. It is important to know exactly what you are doing before you start cutting the rope or try and splice it. The following is helpful tips for cutting and splicing LED rope lighting:

• Cutting the Rope Lights – In order to reduce these lights you might want one of many following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to hold the pipe cutter because you get a straighter edge and there’s less probability of cutting crooked. The entire pipe has slash marks for the pipe to inform you where it is usually cut. Do not cut anywhere that is not marked or else you will find yourself ruining that piece of light so that it is useless. These slash marks run from either eighteen inches or thirty-six inches.

See also: Patriot Lighting Color Changing Led

The two wire type is every eighteen inches as well as the three wire, or chaser lights, is every thirty-six inches. You should look at the area you wish to cover carefully and choose the rope type as outlined by the length of time the rope needs to be. If thirty-six inches is way too long then you need to obtain the two-wire light. Make the cut cleanly after which trim off the excess copper wire through the end by bending the lighting to show it. Once it’s properly prepared, you need to add the connector kit or splice another color or length to the lighting.