Lowes Bathroom Lighting Sconces

Lowes Bathroom Lighting Sconces | One of the main reasons people choose LED rope lighting over other designs of lighting is which is so versatile. Not only can it be shaped to match any area, it is usually cut to match and spliced with pieces in case a longer piece is needed.

It may also be sliced if you want a color combination to match your d?Ă½cor. It is important to know precisely your work prior to starting cutting the rope or try and splice it. The following is helpful tips for cutting and splicing LED rope lighting:

• Cutting the Rope Lights – In order to cut these lights you’ll want one of several following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to contain the pipe cutter when you get yourself a straighter edge as there are less potential for cutting crooked. The entire pipe has slash marks on the pipe tell you where it is usually cut. Do not cut anywhere that is not marked or you’ll wind up ruining that piece of light rendering it useless. These slash marks run from either eighteen inches or thirty-six inches.

See also: Exterior Flourescent Lighting

The two wire type is every eighteen inches and also the three wire, or chaser lights, is every thirty-six inches. You should measure the area you wish to cover carefully and judge the rope type in accordance with how much time the rope needs to be. If thirty-six inches is simply too long then you need to obtain the two-wire light. Make the cut cleanly after which trim off of the excess copper wire through the end by bending the light to reveal it. Once it’s properly prepared, you need to add the connector kit or splice another color or length to the light.