Lighting For Small Dining Rooms | One of the main reasons people choose LED rope lighting over other styles of lighting is which is so versatile. Not only can or not it’s shaped to adjust to any area, it is usually cut to adjust to and spliced along with other pieces if a longer piece is required.
It may also be sliced should you prefer a color combination to match your d?ýcor. It is important to know precisely what you’re doing before starting cutting the rope or attempt to splice it. The following is tips for cutting and splicing LED rope lighting:
• Cutting the Rope Lights – In order to chop these lights you need to have one of several following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to hold the pipe cutter since you get yourself a straighter edge then there is less probability of cutting crooked. The entire pipe has slash marks about the pipe to inform you where it is usually cut. Do not cut anywhere which is not marked or else you find yourself ruining that part of light making this useless. These slash marks run from either eighteen inches or thirty-six inches.
See also: Rec Room Lighting Ideas
The two wire type is every eighteen inches and also the three wire, or chaser lights, is every thirty-six inches. You should appraise the area you would like to cover carefully and choose the rope type based on just how long the rope must be. If thirty-six inches is simply too long you’ll need to obtain the two-wire light. Make the cut cleanly after which trim off the excess copper wire from your end by bending the sunshine to expose it. Once it’s properly prepared, you should add the connector kit or splice another color or length to the sunshine.