Lighting For Girls Bedrooms | One of the main reasons people choose LED rope lighting over other kinds of lighting is because it is so versatile. Not only can you choose shaped to suit any area, it may be cut to suit and spliced to pieces if the longer piece is required.
It may also be sliced should you prefer a color combination to match your d?ýcor. It is important to know precisely what you are doing before starting cutting the rope or attempt to splice it. The following is a guide for cutting and splicing LED rope lighting:
• Cutting the Rope Lights – In order to chop these lights you might want one of several following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to possess the pipe cutter when you get a straighter edge and there is less potential for cutting crooked. The entire pipe has slash marks about the pipe to show you where it may be cut. Do not cut anywhere that’s not marked or you will find yourself ruining that little bit of light making this useless. These slash marks run from either eighteen inches or thirty-six inches.
See also: Very Bright Kitchen Lighting
The two wire type is every eighteen inches along with the three wire, or chaser lights, is every thirty-six inches. You should look at the area you would like to cover carefully and select the rope type based on how long the rope should be. If thirty-six inches is too long you’ll need to get the two-wire light. Make the cut cleanly and then trim over excess copper wire from the end by bending the sunlight to expose it. Once it’s properly prepared, you need to add the connector kit or splice another color or length to the sunlight.