Lighting For Bedroom Vanity

Lighting For Bedroom Vanity | One of the main reasons people choose LED rope lighting over other kinds of lighting is which is so versatile. Not only can it’s shaped to fit any area, it may be cut to fit and spliced with other pieces if a longer piece is necessary.

It may also be sliced if you prefer a color combination to match your d?Ă½cor. It is important to know precisely what you’re doing prior to starting cutting the rope or try to splice it. The following is helpful information for cutting and splicing LED rope lighting:

• Cutting the Rope Lights – In order to reduce these lights you must have one of the following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to contain the pipe cutter because you have a straighter edge then there is less probability of cutting crooked. The entire pipe has slash marks on the pipe to show you where it may be cut. Do not cut anywhere which is not marked or you’ll turn out ruining that little bit of light rendering it useless. These slash marks run from either eighteen inches or thirty-six inches.

See also: Malibu Led Light Bulbs

The two wire type is every eighteen inches as well as the three wire, or chaser lights, is every thirty-six inches. You should look at the area you wish to cover carefully and select the rope type according to just how long the rope needs to be. If thirty-six inches is too long you will need to find the two-wire light. Make the cut cleanly after which trim from the excess copper wire from the end by bending the light to show it. Once it’s properly prepared, you should add the connector kit or splice another color or length to the light.