Led Vanity Lights Lowes | One of the main reasons people choose LED rope lighting over other kinds of lighting is which is so versatile. Not only can you choose shaped to match any area, it may be cut to match and spliced with pieces if the longer piece should be used.
It may also be sliced if you need a color combination to match your d?ýcor. It is important to specifically what you’re doing before you start cutting the rope or try and splice it. The following is helpful tips for cutting and splicing LED rope lighting:
• Cutting the Rope Lights – In order to slice these lights you’ll want one of the following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to possess the pipe cutter when you get a straighter edge and there’s less potential for cutting crooked. The entire pipe has slash marks around the pipe to show you where it may be cut. Do not cut anywhere that isn’t marked or you will wind up ruining that bit of light so that it is useless. These slash marks run from either eighteen inches or thirty-six inches.
See also: Home Theater Wall Sconces Lighting
The two wire type is every eighteen inches along with the three wire, or chaser lights, is every thirty-six inches. You should look at the area you wish to cover carefully and select the rope type based on how long the rope must be. If thirty-six inches is simply too long then you need to obtain the two-wire light. Make the cut cleanly and then trim over excess copper wire in the end by bending the light to show it. Once it can be properly prepared, you need to add the connector kit or splice another color or length to the light.