Led Strip Light Bedroom Ideas

Led Strip Light Bedroom Ideas | One of the main reasons people choose LED rope lighting over other kinds of lighting is which is so versatile. Not only can it be shaped to match any area, it could be cut to match and spliced with pieces if your longer piece is needed.

It may also be sliced if you want a color combination to match your d?Ă½cor. It is important to specifically what you are doing before you begin cutting the rope or make an effort to splice it. The following is a guide for cutting and splicing LED rope lighting:

• Cutting the Rope Lights – In order to reduce these lights you might want one of several following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to contain the pipe cutter as you obtain a straighter edge and there is less chance of cutting crooked. The entire pipe has slash marks around the pipe to show you where it could be cut. Do not cut anywhere which is not marked or you’ll wind up ruining that little bit of light rendering it useless. These slash marks run from either eighteen inches or thirty-six inches.

See also: Track Lighting For Small Kitchen

The two wire type is every eighteen inches and the three wire, or chaser lights, is every thirty-six inches. You should measure the area you wish to cover carefully and choose the rope type in accordance with the length of time the rope should be. If thirty-six inches is way too long you will need to get the two-wire light. Make the cut cleanly and then trim off of the excess copper wire in the end by bending the lighting to expose it. Once it’s properly prepared, you have to add the connector kit or splice another color or length to the lighting.