Led Linear Suspension Lights | One of the main reasons people choose LED rope lighting over other kinds of lighting is because it is so versatile. Not only can it’s shaped to fit any area, it could be cut to fit and spliced with other pieces if a longer piece should be used.
It can even be sliced should you prefer a color combination to match your d?ýcor. It is important to know exactly what you’re doing prior to starting cutting the rope or try and splice it. The following is helpful tips for cutting and splicing LED rope lighting:
• Cutting the Rope Lights – In order to chop these lights you might want one of the following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to have the pipe cutter as you get yourself a straighter edge and there is less probability of cutting crooked. The entire pipe has slash marks for the pipe tell you where it could be cut. Do not cut anywhere which is not marked or else you will find yourself ruining that little bit of light making this useless. These slash marks run from either eighteen inches or thirty-six inches.
See also: Lighting Over Farmhouse Table
The two wire type is every eighteen inches and also the three wire, or chaser lights, is every thirty-six inches. You should measure the area you wish to cover carefully and select the rope type according to just how long the rope should be. If thirty-six inches is simply too long then you need to have the two-wire light. Make the cut cleanly after which trim off the excess copper wire through the end by bending the sunlight to show it. Once it’s properly prepared, you need to add the connector kit or splice another color or length to the sunlight.