Led Daylight Desk Lamp | One of the main reasons people choose LED rope lighting over other styles of lighting is because it is so versatile. Not only can it be shaped to match any area, it is usually cut to match and spliced with pieces in case a longer piece is required.
It can also be sliced if you prefer a color combination to match your d?ýcor. It is important to understand specifically what you are doing prior to starting cutting the rope or try and splice it. The following is tips for cutting and splicing LED rope lighting:
• Cutting the Rope Lights – In order to chop these lights you need to have one of several following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to hold the pipe cutter as you have a straighter edge as there are less possibility of cutting crooked. The entire pipe has slash marks on the pipe tell you where it is usually cut. Do not cut anywhere that’s not marked or you’ll turn out ruining that bit of light so that it is useless. These slash marks run from either eighteen inches or thirty-six inches.
See also: Basement Bar Lighting Ideas
The two wire type is every eighteen inches and also the three wire, or chaser lights, is every thirty-six inches. You should look at the area you want to cover carefully and judge the rope type in accordance with how long the rope needs to be. If thirty-six inches is simply too long you’ll need to get the two-wire light. Make the cut cleanly then trim off the excess copper wire from your end by bending the sunshine to show it. Once it’s properly prepared, you’ll want to add the connector kit or splice another color or length to the sunshine.