Led Backyard Flood Lights | One of the main reasons people choose LED rope lighting over other kinds of lighting is because it’s so versatile. Not only can it’s shaped to suit any area, it could be cut to suit and spliced with other pieces if your longer piece is needed.
It can even be sliced if you want a color combination to match your d?ýcor. It is important to specifically your work prior to starting cutting the rope or make an effort to splice it. The following is helpful information for cutting and splicing LED rope lighting:
• Cutting the Rope Lights – In order to reduce these lights you must have one of many following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to contain the pipe cutter when you get a straighter edge and there’s less probability of cutting crooked. The entire pipe has slash marks around the pipe to inform you where it could be cut. Do not cut anywhere that’s not marked or else you will turn out ruining that bit of light so that it is useless. These slash marks run from either eighteen inches or thirty-six inches.
See also: Bedroom Sconce Reading Light
The two wire type is every eighteen inches as well as the three wire, or chaser lights, is every thirty-six inches. You should look at the area you would like to cover carefully and select the rope type according to how long the rope should be. If thirty-six inches is just too long you will want to obtain the two-wire light. Make the cut cleanly then trim off the excess copper wire from the end by bending the sunshine to reveal it. Once it really is properly prepared, you need to add the connector kit or splice another color or length to the sunshine.