Kitchen Lighting Fixtures Over Table

Kitchen Lighting Fixtures Over Table | One of the main reasons people choose LED rope lighting over other kinds of lighting is because it’s so versatile. Not only can it’s shaped to fit any area, it could be cut to fit and spliced along with other pieces if the longer piece is required.

It may also be sliced if you want a color combination to match your d?Ă½cor. It is important to understand specifically what you are doing before you begin cutting the rope or attempt to splice it. The following is helpful tips for cutting and splicing LED rope lighting:

• Cutting the Rope Lights – In order to slice these lights you must have one of the following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to possess the pipe cutter when you get a straighter edge and there is less chance of cutting crooked. The entire pipe has slash marks around the pipe to show you where it could be cut. Do not cut anywhere that’s not marked or else you turn out ruining that part of light making this useless. These slash marks run from either eighteen inches or thirty-six inches.

See also: Flexible Monorail Lighting

The two wire type is every eighteen inches as well as the three wire, or chaser lights, is every thirty-six inches. You should measure the area you want to cover carefully and choose the rope type based on how much time the rope has to be. If thirty-six inches is simply too long then you need to get the two-wire light. Make the cut cleanly after which trim over excess copper wire from the end by bending the lighting to expose it. Once it can be properly prepared, you should add the connector kit or splice another color or length to the lighting.