Images Of Landscape Lighting

Images Of Landscape Lighting | One of the main reasons people choose LED rope lighting over other kinds of lighting is because it is so versatile. Not only can or not it’s shaped to match any area, it is usually cut to match and spliced along with other pieces if a longer piece is necessary.

It may also be sliced if you want a color combination to match your d?Ă½cor. It is important to know exactly what you are doing prior to starting cutting the rope or try and splice it. The following is helpful tips for cutting and splicing LED rope lighting:

• Cutting the Rope Lights – In order to slice these lights you might want among the following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to possess the pipe cutter when you obtain a straighter edge and there is less chance of cutting crooked. The entire pipe has slash marks around the pipe to show you where it is usually cut. Do not cut anywhere that is not marked or you’ll find yourself ruining that piece of light so that it is useless. These slash marks run from either eighteen inches or thirty-six inches.

See also: Turquoise Lighting Fixtures

The two wire type is every eighteen inches and also the three wire, or chaser lights, is every thirty-six inches. You should appraise the area you want to cover carefully and select the rope type according to how much time the rope must be. If thirty-six inches is simply too long you will want to obtain the two-wire light. Make the cut cleanly after which trim off of the excess copper wire from your end by bending the sunlight to expose it. Once it’s properly prepared, you should add the connector kit or splice another color or length to the sunlight.