Home Bar Lighting | One of the main reasons people choose LED rope lighting over other kinds of lighting is which is so versatile. Not only can or not it’s shaped to suit any area, it may be cut to suit and spliced along with other pieces if a longer piece should be used.
It can even be sliced if you prefer a color combination to match your d?ýcor. It is important to know precisely what you are doing prior to starting cutting the rope or try and splice it. The following is a guide for cutting and splicing LED rope lighting:
• Cutting the Rope Lights – In order to reduce these lights you’ll want among the following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to possess the pipe cutter since you obtain a straighter edge and there is less probability of cutting crooked. The entire pipe has slash marks about the pipe tell you where it may be cut. Do not cut anywhere that isn’t marked or you will end up ruining that piece of light so that it is useless. These slash marks run from either eighteen inches or thirty-six inches.
The two wire type is every eighteen inches as well as the three wire, or chaser lights, is every thirty-six inches. You should appraise the area you wish to cover carefully and choose the rope type as outlined by just how long the rope has to be. If thirty-six inches is too long then you need to obtain the two-wire light. Make the cut cleanly then trim from the excess copper wire through the end by bending the light to expose it. Once it can be properly prepared, you’ll want to add the connector kit or splice another color or length to the light.