Home Bar Lighting Ideas

Home Bar Lighting Ideas | One of the main reasons people choose LED rope lighting over other forms of lighting is because it is so versatile. Not only can it’s shaped to match any area, it could be cut to match and spliced along with other pieces if a longer piece is required.

It can be sliced if you prefer a color combination to match your d?Ă½cor. It is important to know exactly your work before you begin cutting the rope or attempt to splice it. The following is helpful information for cutting and splicing LED rope lighting:

• Cutting the Rope Lights – In order to reduce these lights you’ll want one of the following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to have the pipe cutter because you have a straighter edge then there is less possibility of cutting crooked. The entire pipe has slash marks about the pipe to show you where it could be cut. Do not cut anywhere which is not marked or else you will find yourself ruining that bit of light making it useless. These slash marks run from either eighteen inches or thirty-six inches.

See also: Red Led Icicle Lights

The two wire type is every eighteen inches and also the three wire, or chaser lights, is every thirty-six inches. You should measure the area you would like to cover carefully and judge the rope type as outlined by just how long the rope needs to be. If thirty-six inches is too long you’ll need to obtain the two-wire light. Make the cut cleanly after which trim over excess copper wire from the end by bending the sunlight to expose it. Once it’s properly prepared, you have to add the connector kit or splice another color or length to the sunlight.

Tags: