Home Bar Lighting Fixtures

Home Bar Lighting Fixtures | One of the main reasons people choose LED rope lighting over other forms of lighting is because it’s so versatile. Not only can it be shaped to suit any area, it can be cut to suit and spliced with pieces in case a longer piece is needed.

It can even be sliced should you prefer a color combination to match your d?Ă½cor. It is important to know exactly what you’re doing before you begin cutting the rope or try and splice it. The following is helpful tips for cutting and splicing LED rope lighting:

• Cutting the Rope Lights – In order to cut these lights you need to have one of several following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to have the pipe cutter as you have a straighter edge and there is less probability of cutting crooked. The entire pipe has slash marks about the pipe tell you where it can be cut. Do not cut anywhere which is not marked or you will find yourself ruining that part of light making this useless. These slash marks run from either eighteen inches or thirty-six inches.

See also: Lighted Closet Rod Led

The two wire type is every eighteen inches and also the three wire, or chaser lights, is every thirty-six inches. You should measure the area you want to cover carefully and judge the rope type in accordance with just how long the rope needs to be. If thirty-six inches is simply too long you will want to get the two-wire light. Make the cut cleanly after which trim from the excess copper wire from the end by bending the lighting to expose it. Once it can be properly prepared, you should add the connector kit or splice another color or length to the lighting.

Tags: