Foyer Lighting Modern | One of the main reasons people choose LED rope lighting over other designs of lighting is since it is so versatile. Not only can you choose shaped to fit any area, it may be cut to fit and spliced with other pieces if your longer piece is necessary.
It may also be sliced if you prefer a color combination to match your d?ýcor. It is important to know precisely your work before starting cutting the rope or attempt to splice it. The following is helpful information for cutting and splicing LED rope lighting:
• Cutting the Rope Lights – In order to reduce these lights you’ll want one of several following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to hold the pipe cutter since you get yourself a straighter edge as there are less probability of cutting crooked. The entire pipe has slash marks on the pipe to show you where it may be cut. Do not cut anywhere that’s not marked or you’ll find yourself ruining that piece of light rendering it useless. These slash marks run from either eighteen inches or thirty-six inches.
See also: Malibu Lighting Com
The two wire type is every eighteen inches along with the three wire, or chaser lights, is every thirty-six inches. You should measure the area you need to cover carefully and select the rope type according to how much time the rope should be. If thirty-six inches is just too long you will want to get the two-wire light. Make the cut cleanly and then trim over excess copper wire from your end by bending the sunlight to expose it. Once it can be properly prepared, you should add the connector kit or splice another color or length to the sunlight.