Flexible Led Reading Light Wall Mount

Flexible Led Reading Light Wall Mount | One of the main reasons people choose LED rope lighting over other kinds of lighting is which is so versatile. Not only can you choose shaped to match any area, it can be cut to match and spliced to pieces if a longer piece is required.

It can be sliced if you prefer a color combination to match your d?ýcor. It is important to specifically what you are doing prior to starting cutting the rope or try to splice it. The following is helpful tips for cutting and splicing LED rope lighting:

• Cutting the Rope Lights – In order to cut these lights you need to have among the following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to have the pipe cutter as you have a straighter edge and there’s less chance of cutting crooked. The entire pipe has slash marks about the pipe tell you where it can be cut. Do not cut anywhere that is not marked or you will end up ruining that little bit of light making it useless. These slash marks run from either eighteen inches or thirty-six inches.

See also: Vanity Lighting Up Or Down

The two wire type is every eighteen inches along with the three wire, or chaser lights, is every thirty-six inches. You should measure the area you need to cover carefully and select the rope type in accordance with just how long the rope has to be. If thirty-six inches is just too long you will need to find the two-wire light. Make the cut cleanly and then trim off of the excess copper wire in the end by bending the lighting to expose it. Once it is properly prepared, you should add the connector kit or splice another color or length to the lighting.