Dimmable Bathroom Lighting

Dimmable Bathroom Lighting | One of the main reasons people choose LED rope lighting over other kinds of lighting is since it is so versatile. Not only can it’s shaped to adjust to any area, it could be cut to adjust to and spliced to pieces if a longer piece is necessary.

It can even be sliced if you need a color combination to match your d?Ă½cor. It is important to understand specifically what you’re doing before you begin cutting the rope or try and splice it. The following is helpful tips for cutting and splicing LED rope lighting:

• Cutting the Rope Lights – In order to slice these lights you need to have one of many following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to have the pipe cutter when you have a straighter edge then there is less possibility of cutting crooked. The entire pipe has slash marks around the pipe to inform you where it could be cut. Do not cut anywhere that isn’t marked or you’ll end up ruining that little bit of light making it useless. These slash marks run from either eighteen inches or thirty-six inches.

See also: Semi Flush Dining Room Lighting

The two wire type is every eighteen inches and the three wire, or chaser lights, is every thirty-six inches. You should measure the area you would like to cover carefully and judge the rope type according to just how long the rope must be. If thirty-six inches is too long you will need to get the two-wire light. Make the cut cleanly and after that trim from the excess copper wire from the end by bending the light to expose it. Once it really is properly prepared, you need to add the connector kit or splice another color or length to the light.