Cool Lighting Ideas For Bedroom | One of the main reasons people choose LED rope lighting over other kinds of lighting is which is so versatile. Not only can it’s shaped to fit any area, it is usually cut to fit and spliced along with other pieces if your longer piece is necessary.
It can also be sliced should you prefer a color combination to match your d?ýcor. It is important to know exactly your work prior to starting cutting the rope or make an effort to splice it. The following is helpful tips for cutting and splicing LED rope lighting:
• Cutting the Rope Lights – In order to slice these lights you must have one of the following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to have the pipe cutter when you get yourself a straighter edge and there is less potential for cutting crooked. The entire pipe has slash marks for the pipe to show you where it is usually cut. Do not cut anywhere that isn’t marked or else you will find yourself ruining that part of light so that it is useless. These slash marks run from either eighteen inches or thirty-six inches.
See also: Led Daylight Desk Lamp
The two wire type is every eighteen inches and also the three wire, or chaser lights, is every thirty-six inches. You should measure the area you wish to cover carefully and select the rope type based on the length of time the rope must be. If thirty-six inches is just too long you will want to find the two-wire light. Make the cut cleanly after which trim from the excess copper wire through the end by bending the light to reveal it. Once it really is properly prepared, you’ll want to add the connector kit or splice another color or length to the light.