Contemporary Track Lighting Ideas | One of the main reasons people choose LED rope lighting over other designs of lighting is which is so versatile. Not only can it’s shaped to adjust to any area, it is usually cut to adjust to and spliced with other pieces if the longer piece is needed.
It can also be sliced should you prefer a color combination to match your d?ýcor. It is important to understand specifically what you’re doing prior to starting cutting the rope or try and splice it. The following is helpful tips for cutting and splicing LED rope lighting:
• Cutting the Rope Lights – In order to chop these lights you’ll want one of the following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to have the pipe cutter because you get a straighter edge then there is less potential for cutting crooked. The entire pipe has slash marks for the pipe to inform you where it is usually cut. Do not cut anywhere that isn’t marked or else you will turn out ruining that part of light making this useless. These slash marks run from either eighteen inches or thirty-six inches.
See also: Wireless Track Lighting Fixtures
The two wire type is every eighteen inches along with the three wire, or chaser lights, is every thirty-six inches. You should look at the area you would like to cover carefully and choose the rope type in accordance with just how long the rope must be. If thirty-six inches is just too long you’ll need to find the two-wire light. Make the cut cleanly then trim from the excess copper wire in the end by bending the light to expose it. Once it can be properly prepared, you have to add the connector kit or splice another color or length to the light.