Church Lighting Design Ideas

Church Lighting Design Ideas | One of the main reasons people choose LED rope lighting over other styles of lighting is because it is so versatile. Not only can you choose shaped to match any area, it can be cut to match and spliced with other pieces if the longer piece is needed.

It can even be sliced if you need a color combination to match your d?Ă½cor. It is important to understand specifically your work prior to starting cutting the rope or attempt to splice it. The following is a guide for cutting and splicing LED rope lighting:

• Cutting the Rope Lights – In order to chop these lights you need to have one of many following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to contain the pipe cutter because you have a straighter edge and there’s less potential for cutting crooked. The entire pipe has slash marks on the pipe tell you where it can be cut. Do not cut anywhere that’s not marked or you will find yourself ruining that part of light making this useless. These slash marks run from either eighteen inches or thirty-six inches.

See also: Christmas Led Lights Amazon

The two wire type is every eighteen inches and also the three wire, or chaser lights, is every thirty-six inches. You should appraise the area you would like to cover carefully and choose the rope type based on the length of time the rope must be. If thirty-six inches is simply too long you will need to get the two-wire light. Make the cut cleanly and after that trim off of the excess copper wire from your end by bending the lighting to show it. Once it can be properly prepared, you need to add the connector kit or splice another color or length to the lighting.

Tags: