Cheap Deck Lighting Ideas

Cheap Deck Lighting Ideas | One of the main reasons people choose LED rope lighting over other designs of lighting is which is so versatile. Not only can or not it’s shaped to suit any area, it could be cut to suit and spliced to pieces if a longer piece should be used.

It can also be sliced should you prefer a color combination to match your d?Ă½cor. It is important to know precisely your work before starting cutting the rope or try to splice it. The following is tips for cutting and splicing LED rope lighting:

• Cutting the Rope Lights – In order to reduce these lights you might want one of several following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to hold the pipe cutter since you obtain a straighter edge then there is less potential for cutting crooked. The entire pipe has slash marks around the pipe to inform you where it could be cut. Do not cut anywhere which is not marked or else you end up ruining that bit of light so that it is useless. These slash marks run from either eighteen inches or thirty-six inches.

See also: Images Of Pendant Lighting

The two wire type is every eighteen inches along with the three wire, or chaser lights, is every thirty-six inches. You should measure the area you would like to cover carefully and judge the rope type in accordance with just how long the rope must be. If thirty-six inches is just too long then you need to find the two-wire light. Make the cut cleanly after which trim from the excess copper wire through the end by bending the light to expose it. Once it really is properly prepared, you’ll want to add the connector kit or splice another color or length to the light.