Best Recessed Lighting For Bedrooms | One of the main reasons people choose LED rope lighting over other forms of lighting is because it is so versatile. Not only can it’s shaped to fit any area, it may be cut to fit and spliced along with other pieces if a longer piece should be used.
It can be sliced if you prefer a color combination to match your d?ýcor. It is important to know precisely what you’re doing before you start cutting the rope or make an effort to splice it. The following is a guide for cutting and splicing LED rope lighting:
• Cutting the Rope Lights – In order to cut these lights you need to have one of several following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to hold the pipe cutter because you get yourself a straighter edge and there’s less potential for cutting crooked. The entire pipe has slash marks around the pipe to show you where it may be cut. Do not cut anywhere that is not marked or else you wind up ruining that piece of light making this useless. These slash marks run from either eighteen inches or thirty-six inches.
See also: Nature Inspired Lighting
The two wire type is every eighteen inches along with the three wire, or chaser lights, is every thirty-six inches. You should measure the area you would like to cover carefully and choose the rope type based on how long the rope has to be. If thirty-six inches is simply too long then you need to get the two-wire light. Make the cut cleanly and after that trim from the excess copper wire from the end by bending the light to reveal it. Once it is properly prepared, you need to add the connector kit or splice another color or length to the light.