Bedroom Wall Lighting Ideas

Bedroom Wall Lighting Ideas | One of the main reasons people choose LED rope lighting over other forms of lighting is which is so versatile. Not only can it be shaped to match any area, it can be cut to match and spliced to pieces if your longer piece is necessary.

It can also be sliced if you prefer a color combination to match your d?Ă½cor. It is important to understand specifically what you are doing before starting cutting the rope or make an effort to splice it. The following is helpful tips for cutting and splicing LED rope lighting:

• Cutting the Rope Lights – In order to reduce these lights you must have one of several following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to have the pipe cutter when you get yourself a straighter edge and there’s less possibility of cutting crooked. The entire pipe has slash marks around the pipe to show you where it can be cut. Do not cut anywhere that is not marked or you will end up ruining that little bit of light making it useless. These slash marks run from either eighteen inches or thirty-six inches.

See also: Cottage Dining Room Lighting

The two wire type is every eighteen inches along with the three wire, or chaser lights, is every thirty-six inches. You should appraise the area you need to cover carefully and select the rope type according to the length of time the rope should be. If thirty-six inches is simply too long then you need to get the two-wire light. Make the cut cleanly and after that trim off of the excess copper wire in the end by bending the lighting to expose it. Once it is properly prepared, you have to add the connector kit or splice another color or length to the lighting.