5 Light Track Lighting System

5 Light Track Lighting System | One of the main reasons people choose LED rope lighting over other designs of lighting is because it’s so versatile. Not only can it’s shaped to adjust to any area, it could be cut to adjust to and spliced along with other pieces if a longer piece is required.

It can even be sliced should you prefer a color combination to match your d?Ă½cor. It is important to understand specifically your work before you start cutting the rope or try to splice it. The following is tips for cutting and splicing LED rope lighting:

• Cutting the Rope Lights – In order to reduce these lights you must have among the following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to possess the pipe cutter when you have a straighter edge and there’s less probability of cutting crooked. The entire pipe has slash marks around the pipe to show you where it could be cut. Do not cut anywhere that’s not marked or you’ll turn out ruining that little bit of light rendering it useless. These slash marks run from either eighteen inches or thirty-six inches.

See also: Ikea Dining Light

The two wire type is every eighteen inches and the three wire, or chaser lights, is every thirty-six inches. You should appraise the area you would like to cover carefully and judge the rope type based on how long the rope has to be. If thirty-six inches is simply too long you will want to obtain the two-wire light. Make the cut cleanly after which trim over excess copper wire from the end by bending the lighting to reveal it. Once it is properly prepared, you need to add the connector kit or splice another color or length to the lighting.