2014 Camaro Interior Lighting

2014 Camaro Interior Lighting | One of the main reasons people choose LED rope lighting over other designs of lighting is because it is so versatile. Not only can you choose shaped to fit any area, it could be cut to fit and spliced with pieces if a longer piece should be used.

It can also be sliced if you want a color combination to match your d?Ă½cor. It is important to understand specifically your work before you start cutting the rope or make an effort to splice it. The following is tips for cutting and splicing LED rope lighting:

• Cutting the Rope Lights – In order to reduce these lights you must have among the following, a PVC pipe cutter, box cutter or heavy-duty scissors. It is advisable to contain the pipe cutter as you obtain a straighter edge then there is less possibility of cutting crooked. The entire pipe has slash marks on the pipe tell you where it could be cut. Do not cut anywhere which is not marked or else you will turn out ruining that little bit of light rendering it useless. These slash marks run from either eighteen inches or thirty-six inches.

See also: Ott Light Led

The two wire type is every eighteen inches and also the three wire, or chaser lights, is every thirty-six inches. You should appraise the area you need to cover carefully and judge the rope type in accordance with how long the rope should be. If thirty-six inches is way too long you will need to get the two-wire light. Make the cut cleanly and then trim off of the excess copper wire in the end by bending the sunshine to show it. Once it’s properly prepared, you’ll want to add the connector kit or splice another color or length to the sunshine.